HOBART ITW FEG Hong Kong LTD
Unit 2516, 25F., Technology Park,
18 On Lai Street, Siu Lek Yuen,
Shatin, N.T., Hong Kong
Phone (852) 2341 9315
Fax (852) 2341 3914
Sales@hobart.com.hk

PREMAX CP

DESCRIPTION



PRODUCT ADVANTAGES

  • Optimum hygienic safety by deep drawn tanks
  • Tank insulation
  • Heat recovery C20
  • Stainless steel strainer system completely covering wash tanks
  • Including rinse actuator
  • Including main switch
  • Including autotimer
  • Stainless steel wash pump
  • Protronic control

SENSOTRONIC WASHING INTELLIGENCE

SENSOTRONIC automatically adjusts consumption to the actual load in the rack-type dishwasher. The system autodetects the amount of washware as well as empty sections and reduces the consumption to a necessary minimum. 
Your benefit: cost savings you will notice.

COMPARTMENT DETECTION AUTO-SAVE
The program automatically detects gaps without racks and immediately reduces the fresh water supply down to the minimum necessary for a perfectly hygienic result while cutting water, power and detergent consumption.

WATER CONSUMPTION CONTROL AQUA-ADAPT
The system automatically adjusts the hourly fresh water consumption to the selected transfer speed, keeping water volumes per meter of the dishwasher at all times at an optimized level. 

RESOURCE MANAGEMENT MINIMAL
The fresh water consumption is automatically reduced so that operating costs are significantly lowered. The total savings for water, energy and chemicals can amount to up to 10 %, depending on the machine type.

WASHWARE DETECTION ACTIVE (OPTIONAL)
Optional wash ware detection system that adjusts the wash process to the high demands of glassware and cutlery washing. Coded glass racks are automatically detected in the machine, and the wash parameters are configured to match the new requirements.

SYSTEM CHECK BEST-START
Each time the machine is filled with new soiled goods, the relevant parameters for hygiene and proper washing, such as the heating system, pump and wash arm are automatically checked for correct positioning and operation.

AUTOMATIC SOIL REMOVAL PERMANENT (OPTIONAL)

  • Active soil removal from the zone
  • Constant high-level wash water quality
  • Reduction in water, energy, and chemicals consumption
  • Reduces refilling during operation
  • Convenient removal of soiling at the end of the diswashing shift
  • No soiling spreading around the appliance

FRESH WATER RINSE 50 PERCENT

  • Reduces fresh water consumption by up to 60%
  • Detergent is rinsed off the wash ware in an optimal way
  • Microfine spraying of clear rinse water from four sides
  • Significant reduction in rinse aid and energy consumption

DETERGENT SAVING SYSTEM LOW-CHEM

  • Reduces detergent consumption by up to 80%
  • Detergent dosing only necessary for approx. 75 l/h of regeneration water
  • Environmentally friendly

ENERGY-MANAGEMENT TOP-TEMP

  • Energy loss- and costs are reduced by up to 20%
  • Temperature equalization only takes places within the machine
  • High temperature wash zone is embedded between low temperature pre-wash and fresh water rinse zone.

ENERGY-MANAGEMENT EFFICIENT

  • Reduces evaporation losses
  • Reduces energy losses by up to 15 %
  • Reduces the primary energy demand

HOBART HEAT RECOVERY

  • Uses energy from the extracted air to heat up the incoming water
  • Energy saving of up to 8.5 kwh
  • Simple cleaning

HOBART HEAT PUMP

  • Heat energy is recovered from the hot extracted air
  • Energy saving of up to 10kwh
  • Heats the wash and rinse water

WASH SYSTEM CONTACT-PLUS

  • 6 upper and 5 lower wash arms guarantee an optimal wash result
  • More active contact of wash water with wash ware
  • Precise spray pattern due to each wide angle nozzle fan

WIDE ANGLE NOZZLE

  • 65% wider spray pattern due to optimal nozzle geometry
  • Due to the high precision of the wide angle nozzles, wash warms can be put tighter together
  • Wash water is distributed efficiently, spray shadows are avoided

HOT-TEMP WASH

  • Increases the machine capacity by up to 50 %
  • Continuous wash temperature of approx. 67°C
  • Guaranteed hygiene safety due to hot washing

RINSE TRI

  • Perfect rinse result due to three-step zone
  • Minimization of detergent concentration in the rinse

PUMPED RINSE 80DEGREES

  • High temperature input into the wash ware by continuous water recirculation
  • Considerably increased self-drying effect due to high temperature absorbed by the wash ware

PROTRONIC CONTROL

  • Innovative control with text - and symbol display
  • Operated by touch screen
  • Simple, intuitive operation 

HANDLING ASSISTANT EASY

featuring
  • PROTRONIC control
  • Drop-In wash system
  • Coded wash and rinse arms
  • Coded curtains

CLEANING ASSISTANT SUPPORT

including
  • Wash system
  • Bayonet catch
  • Completely moulded tanks
  • 1-part strainer
  • 150 mm floor clearance
  • Condenser
  • Panorama door
  • Cleaning Assistance

TECHNICAL DATA

BROCHURE


For further brochures or other languages please contact your dealer or contact us.


 
Genial Einfach Genial1

PREMAX TECHNOLOGY

HOBART worldwide

HOBART worldwide

Distributor map

Find your distributor:
 
HOBART ITW FEG HK LTD
Unit 2516, 25F., Technology Park,
18 On Lai Street, Siu Lek Yuen,
Shatin, N.T., Hong Kong
Phone (852) 2341 9315
Fax (852) 2341 3914
Sales@hobart.com.hk